Groutings

Gubbi Civil Engineers which deals with a varied range of civil repairing and waterproofing works such as Structural repair, carbon wrapping, Glass fiber wrapping, Coating, Stamped concrete, Pavers etc, is a well-established organization for the past two decades. The company earned good reputation for having the professionally equipped team who has a varied experience of the markets and good knowledge of serving the customers to their satisfaction.

It is a high strength epoxy grout which consists of epoxy resin, and epoxy hardener. It is suitable for grouting bases of numerous configurations. This shrinkage gives excellent strength and resistance to many corrosive chemicals. It is commonly used for repairing hairline cracks and cavities in concrete structures and can be adopted as primer or bonding agent. It provides excellent bond to foundation and maximum bearing for long lasting grouting projects.

Tanks, turbines and housings; Large anchor bolts and keyways; Fertilizer petrochemicals indus- tries, etc.

Non shrink, free flowing; Fast setting/quick return to service; High chemical resistance; Excellent bearing; Excellent bond foundation to base plate; Stable in deep or thick sections.

PU Grouting is made of PU mixed with accelerators grouted at high pressure in the concrete structure. It is effective in cutting off gushing water of high pressure and velocity. This is most effective for water retaining structures.

Special low viscosity; Moisture tolerant; High strength epoxies; Excellent flow ability in injection grouting; Non shrink; Strong bond with contact surface; No bleeding and segregation; Ready to use and Economical.

Structural columns bearing plates Anchor bolts; Precast columns Foundation underpinnings; Prestressed cables; Precast joints cable anchorages; Patching holes and cracks; Post tensioned strands Machine pads. Tilt-up panels.

Micro fine cement is four times finer than the normal cement and has the ability to penetrate more into the finer pores and finer cracks. Micro fine cement grouting is done with admixtures such as expander and Vulcanizing agents. The grout is non toxic, odourless, pollution free, shrinkage free, thus can be used under any situation. It can be used for increasing the load bearing capacity of the sub soil. 

Micro fine cement grout provides high strength to exceed design requirements and provide a large margin of safety for field variation.

No shrinkage phenomenon happens when solidifying; High; early and final strength; Super fine with tight particle size distribution; Non polluting inorganic material with no hazardous ingredients; Variable set and cure time; Easy to handle; store and use.

Dam foundation; Pouring undergrounding waterproof curtain; Foundation settlements in high way; Bridges; Airport runway.

PU Foam Grout is isocyanine based which transforms into a semi-rigid polyurethane foam when in contact with water. This water reactive grout is specially designed and formulated for injection into leaking concrete, masonry, brick work or concrete expansion joint to stop the flow of water.

Easy to grout; one component with accelerator; Hydrophobic; only a small amount of water is needed for reaction; Expands 15 times the liquid volume; Nonflammable; Adjustable set times using accelerator; Contains no volatile solvents; ANSI/NSF 61 approved for potable water contact.